Epson ActionLaser 1400 사용자 설명서 - 페이지 6

{카테고리_이름} Epson ActionLaser 1400에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson ActionLaser 1400 30 페이지. Flatbed inkjet printer
Epson ActionLaser 1400에 대해서도 마찬가지입니다: 사용자 설명서 (8 페이지), 첫 번째 매뉴얼 읽기 (27 페이지)

페이지 인쇄

Flatbed Inkjet Printer

3. Pump depose ink

Open the depose ink protecting windows, please take the depose ink duct from the ink bottle,

connect it with the Injector, (please notice that the cartridge should be in position initialized), draw

back the injector and keep it with less volume ink in the injector, after this, please recover the

depose Ink duct back to the depose ink bottle.

When we finished the all course, please press the key "cleaning" to clean print-head. (You can

also do this step by software with clean function on computer)。

Note：

1．When we pump ink, there might have problem of speeding ink, it is indicating that the ink

bursa was damaged, please replace it.

2．During pump ink, if there with air seeping situation, and it could not pump ink good, it is

indicating there were not with good performance be sealed to the cleaning system, we need

to exchange the protector about print-head.

3．There might have "siphon" situation be happened in the transmission pipe of the printer, please

kindly have cleaning job to the printer after pump the depose ink.

4．For indicating the color of the ink, we have mark it with sign as below:

Cyan（blue）— C、Magenta（Red）— M、Yellow— Y、Black— K、

Light Cyan（Light Blue）— LC、Light Magenta（Light Red）— LM

Warn

６