Epson ActionLaser 1500 설치 매뉴얼 - 페이지 5

{카테고리_이름} Epson ActionLaser 1500에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson ActionLaser 1500 7 페이지. Imaging cartridge replacement procedure
Epson ActionLaser 1500에 대해서도 마찬가지입니다: 종이 및 종이 배달 (11 페이지), 설정 매뉴얼 (18 페이지), 제품 지원 게시판 (8 페이지), 제품 사양 (1 페이지)

페이지 인쇄

Selecting PostScript

You need to change the emulation or mode setting through

SelecType before you can use PostScript.

The SelecType instructions below enable you to assign

PostScript quickly. If you need more detailed instructions on

using SelecType, see your printer manual

Note:

Be sure to install the interface and PostScript cards first. Otherwise,

the PostScript emulation or mode aloes not appear as a SelecType

option on the printer display.

For the ActionLaser 1000 and 1500

1. Press the ON LINE button to take the printer off line.

2. Press the SelecType Level 2 button.

3. Press V until EMULATION appears on the display.

Press b.

5. Press V until CH O appears.

Press b.

7. Press V until PS appears.

8. Press F to set the PS emulation.

9. Press the EXIT button twice to return to the READY message.

Note:

The READY message may not show O PS (indicating the

optional interface and PostScript) until after yourfirst print job

is sent from your computer to the printer each time you turn on

your printer.

10. Make sure that AppleTalk is active in the Chooser under the

Apple menu on your Macintosh.