Epson ActionLaser 1600 첫 번째 매뉴얼 읽기 - 페이지 19

{카테고리_이름} Epson ActionLaser 1600에 대한 첫 번째 매뉴얼 읽기을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson ActionLaser 1600 26 페이지. Epson actionlaser 1600: quick start
Epson ActionLaser 1600에 대해서도 마찬가지입니다: 사용자 설명서 (10 페이지), 제품 사양 (2 페이지)

페이지 인쇄

Non-Windows software

Since each program differs in its setup capabilities, there is no

standard way to select the printer driver. See your software

manual for information on how to select an HP LaserJet 4

driver.

Using the serial interface

If you are using the serial interface, you need to ensure that the

printer and the computer are using the same serial settings. If

the serial settings do not match, you must change the

appropriate settings. The settings can be changed either at the

printer or computer.

The printer's default serial settings are listed below. To change

the printer's serial settings, see "SERIAL MENU" in Chapter 4

of the Reference Guide. For information about your computer's

serial settings, see your computer manual.

serial

Word length

Baud rate

Parity

Stop bit

DTR

XON/XOFF

DSR

You also need to change the port setting at your computer if it

is not already selected for the serial port. The following

procedure describes how to change the port setting in

Windows. To change the setting using non-Windows software,

see your software manual.

1. In the Main window, doubleclick on the Control Panel

icon.

RS-232C

NONE

OFF