DigiDesign 96i I/O 빠른 매뉴얼 - 페이지 11

{카테고리_이름} DigiDesign 96i I/O에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DigiDesign 96i I/O 13 페이지. 16-input, 2-output digital audio interface features 24-bit analog-to-digital (a/d) and digital-to-analog (d/a) converters
DigiDesign 96i I/O에 대해서도 마찬가지입니다: 매뉴얼 (16 페이지), 매뉴얼 (20 페이지)

페이지 인쇄

96i I/O Back Panel

Figure 2. 96i I/O back panel

Analog Inputs

The 96i I/O has 16 balanced, 1/4-inch TRS con-

nectors for analog audio input connections.

Inputs 1–4 provide six stages of software-ad-

justable operating level sensitivity. Choices

range from –12.0 dB(V) to +4.0 dBu, with de-

fault sensitivity set to –8 dB(V).

Inputs 5–16 are software-switchable between

–8 dBV and +4 dBu operating level sensitivity.

The 96i I/O inputs can accommodate a wide

range of line-level devices including synthesiz-

ers, samplers, sound modules, and effects de-

vices.

All analog inputs are balanced, and feature

24-bit, 96 kHz analog-to-digital converters, with

14 dB of headroom above +4 dBu (fixed, requir-

ing no calibration). Unbalanced connections are

supported with the use of standard 1/4-inch

mono phone plugs.

96i I/O input wiring for balanced connections

Tip

Hot (or +)

Ring

Cold (or –)

Sleeve

Ground

Analog Outputs

The 96i I/O has two balanced, 1/4-inch TRS

jacks for analog audio output connections.

The 96i I/O analog outputs feature 24-bit digi-

tal-to-analog converters. Output operating lev-

els are software-switchable between +4 dBu and

–10 dB(V) operating levels.

The 96i I/O is factory calibrated at +14 dB head-

room, yielding a maximum output level of

+18 dBu when in +4 dBu operating mode. When

set to –10 dB(V) operating mode, maximum

output level is +4 dBV.

Unbalanced connections are supported with the

use of standard 1/4-inch mono phone plugs.

96i I/O output wiring for balanced connections

Tip

Hot (or +)

Ring

Cold (or –)

Sleeve

Ground

Chapter 2: 96i I/O Hardware Overview