Epson ActionPrinter 3250 매뉴얼 - 페이지 7
{카테고리_이름} Epson ActionPrinter 3250에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson ActionPrinter 3250 9 페이지. Epson actionprinter 3250: quick reference
Epson ActionPrinter 3250에 대해서도 마찬가지입니다: 빠른 참조 카드 (6 페이지)
Tips for using continuous paper
You can adjust the top-of-form position temporarily. Open the
l
printer cover and turn the gear marked by + and - signs to
adjust the position This adjustment is lost when you turn off the
printer or feed the paper backward to the paper-park position by
pressing the FORM FEED and FONT buttons at the same time.
If you want to change the top-of-form position permanently,
l
adjust it with the default-setting mode.
Each time you turn on the printer with paper loaded, it reverses
l
the continuous paper to the paper-park position and then
advances it to the next top-of-form. Always remove your printed
sheets before you turn off the printer to keep the top-of-form
position accurate.
Removing the push tractor
1. Tear off any printed pages. Press the FORM FEED and FONT
buttons at the same time to feed the remaining paper backward
to the paper-park position Remove the paper from the push
tractor.
Always tear off the printed document and
CAUTION:
excess paper before feeding paper backward. Never feed
more than one page backward through the printer.
2. Turn off the printer.
3. Lower the paper-release lever to the single sheet position. Then
pull the push tractor straight down and out of the printer.
24-Pin Printers
Replace the
4.
paper guide.
Switching Between Continuous
When you use the push tractor, you can easily switch to single-sheet
printing without removing the continuous paper supply.
Switching to single sheets
Here's how to switch from continuous paper to single sheets:
1. If you have a printed document stilI in the printer, tear off the
printed pages and then press the FORM FEED and FONT buttons at
the same time to reverse the remaining paper back to the paper-
park position.
CAUTION:
Always tear off printed pages before feeding paper
l
backward; feeding too many sheets backward can
cause a paper jam.
Never feed labels backward. They can easily peel off of
l
their backing and jam the printer.
2. Lower the paper-release lever to the single-sheet position.
3/17/92
ActionPrinter 3250
and Single
Paper
AP-3250-7