Epson ActionTower 3000 Computer 사용자 설명서 - 페이지 20

{카테고리_이름} Epson ActionTower 3000 Computer에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson ActionTower 3000 Computer 34 페이지. Product information guide
Epson ActionTower 3000 Computer에 대해서도 마찬가지입니다: 사용자 설명서 (38 페이지), 카트리지 교체 (2 페이지), 첫 번째 매뉴얼 읽기 (29 페이지), 제품 정보 매뉴얼 (11 페이지), 빠른 설정 매뉴얼 (4 페이지)

페이지 인쇄

Close the Add/Remove Programs Properties window, close the Control

Panel, and then shut down the computer.

Setting Up the Printer

If you've been using your EPSON printer with your computer, the printer is

probably set up already. If so, make sure your system is turned off and

disconnect the printer from the computer. Also, make sure the printer

software has been deleted, as described above. Then go to "Connecting the

Cable" in the next section to attach the cable to your system.

If you're setting up a new printer, see the documentation that came with your

printer for instructions on unpacking it, installing ink cartridges, and loading

paper. Then return to this booklet for instructions on connecting the cable

and installing your printer software.

Connecting the Cable

You can connect the USB/Parallel Adapter directly to a USB port on your

computer, or you can connect it to a USB hub connected to a port on your

computer. If you have any printing problems when the printer is connected

via a USB hub, try connecting your printer directly to the USB port on the

computer instead.