Epson Aculaser 2600 Series 용지 걸림 매뉴얼 - 페이지 2
{카테고리_이름} Epson Aculaser 2600 Series에 대한 용지 걸림 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson Aculaser 2600 Series 4 페이지. Epson aculaser c2600dtn: install guide
Epson Aculaser 2600 Series에 대해서도 마찬가지입니다: 브로셔 및 사양 (6 페이지), 설정 매뉴얼 (16 페이지)
페이지 인쇄
1
2
3
4
Jam A, B (cover A and B)
If the optional Duplex Unit is installed,
lift up the Duplex Unit. Hold it and gently
pull out any sheets of paper. Be careful
not to tear the jammed paper.
Warning:
w
Be careful not to touch the fuser, which is
marked CAUTION HIGH TEMPERATURE,
or the surrounding areas. If the printer has
been in use, the fuser and the surrounding
areas may be very hot. If you must touch one
of these areas, open cover A and B, then wait
30 minutes to allow the heat to subside
before doing so.
5
6
Warning:
w
Be careful not to touch the fuser, which is
marked CAUTION HIGH TEMPERATURE,
or the surrounding areas. If the printer has
been in use, the fuser and the surrounding
areas may be very hot. If you must touch one
of these areas, open cover A and B, then wait
30 minutes to allow the heat to subside
before doing so.
If you can remove the paper, close covers
B and A. If you cannot remove the paper,
go to the next step.
7
Warning:
w
Be careful not to touch the fuser, which is
marked CAUTION HIGH TEMPERATURE,
or the surrounding areas. If the printer has
been in use, the fuser and the surrounding
areas may be very hot. If you must touch one
of these areas, open cover A and B, then wait
30 minutes to allow the heat to subside
before doing so.
8
9
10
11
12