Epson AcuLaser C2000 빠른 참조 - 페이지 20
{카테고리_이름} Epson AcuLaser C2000에 대한 빠른 참조을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson AcuLaser C2000 29 페이지. Color laser printer
Epson AcuLaser C2000에 대해서도 마찬가지입니다: 포장 풀기 매뉴얼 (21 페이지), 설정 매뉴얼 (46 페이지), 빠른 참조 (29 페이지)
페이지 인쇄
Messages
Description
You should reset the printer to
save the current settings.
The printer is checking the ROM.
The printer is running a self-
diagnostic program.
The printer is turned on, but is in
the energy-saving mode.
The printer is warming up.
The printer is writing data onto
the ROM in slot A.
The printer is writing data onto
the program ROM module.
Error message list
Messages
Description
The printer has encountered
problems during duplex
printing. Make sure you are
using an appropriate type and
size of paper for the Duplex Unit.
The problem could also be a
result of incorrect settings for the
paper source you are using.
Pressing the Continue button will
resume single-side printing.
Messages
Description
The size of paper being printed
on is different from the specified
paper size during duplex
printing and printing stops. Load
the specified paper source with
the correct paper size. Then
open the cover of the Duplex
Unit and remove any jammed
paper. The jammed page's
print data is automatically
reprinted once you close the
cover of the Duplex Unit.
You have loaded media other
than transparencies when the
Paper Type setting in the printer
driver is Transparency. The
printer ejects the sheet without
printing on it. Load
transparencies into the
specified paper source, then
press the Continue button.
The paper size setting is different
from the size of paper loaded in
the printer. Check to see if the
correct size of paper is loaded
in the specified paper source,
then press the Continue button.
20
20
20
20