Epson AcuLaser C2000 빠른 참조 - 페이지 26
{카테고리_이름} Epson AcuLaser C2000에 대한 빠른 참조을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson AcuLaser C2000 29 페이지. Color laser printer
Epson AcuLaser C2000에 대해서도 마찬가지입니다: 포장 풀기 매뉴얼 (21 페이지), 설정 매뉴얼 (46 페이지), 빠른 참조 (29 페이지)
페이지 인쇄
Messages
Description
The writing of PostScript 3
commands on the optional
Hard Disk Drive is no longer
possible as the amount of space
allocated to PostScript 3 on the
Hard Disk Drive is used up.
The fuser unit has reached the
end of its service life. The error
automatically clears itself after
you replace both the fuser unit
and the second transfer roll.
The fuser oil roll has reached the
end of its service life. Replace it
with a new fuser oil roll.
The photoconductor unit has
reached the end of its service
life. You have to replace all
items included in the
photoconductor kit, which
includes the photoconductor
unit, the waste toner collector,
and the print head filter.
The error clears itself once you
have replaced all the items and
close the front and top covers.
The photoconductor counter
level is automatically reset.
Messages
Description
The transfer belt unit has
reached the end of its service
life. Replace it with a new
transfer belt unit into the printer.
The waste toner collector is full
of toner. Replace it with a new
waste toner collector.
The error clears itself after you
have replaced the waste toner
collector and close the front
cover.
Exxx/Cxxxx: Any number is
indicated.
A controller error or a print
engine error has been
detected. Write down the error
number listed on the LCD panel
and turn off the printer. Wait at
least 10 seconds and then turn
it back on. If this error still occurs,
turn off the printer, unplug the
power cord, and contact a
qualified service representative.
26
26
26
26