DiGidot 20342 매뉴얼 - 페이지 15

{카테고리_이름} DiGidot 20342에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DiGidot 20342 17 페이지.

TIPS & TROUBLESHOOTING

In case you run into any trouble, please check your setup according to following checklist.

1. Double check all cables and connections.

2. Double check any soldered connections

3. Double check Network cable pinout and crimped connectors

4. Is the DiGidot C4 powered correctly?

5. Are the LEDs powered correctly?

6. Are all power supplies connected correctly to your mains power supply?

7. Is your network setup done correctly?

‣ Prevent IP Address conﬂicts

‣ Make sure that the subnet mask is set correctly and that all IP Address are set within the

appropriate range.

‣ Refer to further trouble shooting tips in the DiGidot C4 user manual.

8. Are the DiGidot C4 inputs and outputs conﬁgured correctly?

‣ Make sure that the correct IC/SPI protocol is conﬁgured.

‣ Make sure that input and output matches the system setup.

Use the highlight option to test the outputs.

9. Double check if all grounds (DC-) from all power supplies that are connected to all lighting

products which are controlled from one DiGidot C4 and PxLNet Transmitter, are connected.

For technical speciﬁcations, latest documentation, manuals, product information and further support

please visit www.digidot.eu.

We've put great care in writing this manual. However in case you encounter any discrepancies or

unclarities, please contact us.

PxLNet Transmitter (20342) Manual

Version 1.8 - November 2021 |

15 17