Epson AcuLaser C4000 빠른 참조 - 페이지 6
{카테고리_이름} Epson AcuLaser C4000에 대한 빠른 참조을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson AcuLaser C4000 23 페이지. High performance colour lasers
Epson AcuLaser C4000에 대해서도 마찬가지입니다: 브로셔 및 사양 (24 페이지), 설정 매뉴얼 (48 페이지), 브로셔 및 사양 (6 페이지)
페이지 인쇄
Hard Disk Full
The optional Hard Disk Drive is full and you
cannot save any data. Delete the
unnecessary data from the Hard Disk Drive.
To clear this error, select Clear Warning
from the control panel's Reset Menu. For
instruction about accessing the control panel
menus, see "How to access the control panel
menus."
HDD Check
The printer is checking the Hard Disk Drive.
HDD Format ***%
The HDD is being formatted. The progress
of the format is shown as ***%.
Image Optimum
There is insufficient memory to print the
page at the specified print quality. The
printer automatically lowers the print
quality so that it can continue printing. If the
quality of the printout is not acceptable, try
simplifying the page by limiting the number
of graphics or reducing the number and size
of fonts.
To clear this error, select Clear Warning
from the control panel's Reset Menu. For
instruction about accessing the control panel
menus, see "How to access the control panel
menus."
Turn the Image Optimum setting off on the
control panel's Printing Menu if you do not
want the printer to automatically lower the
print quality to continue printing.
You may need to increase the amount of
printer memory to be able to print at the
desired print quality for your document. For
more information on adding memory, see
"Memory Modules" in the Reference Guide.
EPSON AcuLaser C4000 Quick Reference
Install Fuser
There is no fuser unit installed or the fuser
unit is not installed properly. Turn off the
printer and install the fuser unit if it is not
installed.
If a fuser unit is already installed, turn off the
printer, open cover A, then open cover D.
Then close cover A and open cover B.
Remove the fuser unit, then reinstall it
properly. Close covers D and B. The error
clears automatically if the fuser unit is
properly installed.
If the error is not cleared, the fuser unit is out
of order. Replace it with a new fuser unit.
Install LC1
The paper tray of the standard paper cassette
is not installed, or not installed properly.
Install the paper cassette correctly to clear
this error.
Install LC2
The paper trays of the optional Large
Capacity Paper Unit are not installed, or not
installed properly. Install the paper trays
correctly to clear this error.
Install Photoconductor
There is no photoconductor unit installed or
the photoconductor unit is not installed
properly. Turn off the printer and install the
photoconductor unit if it is not installed.
If a photoconductor unit is already installed,
turn off the printer, open cover A, then open
cover D. Remove the photoconductor unit,
then reinstall it properly. Close covers D and
A. The error clears automatically if the
photoconductor unit is properly installed.
(6/22)