Epson AcuLaser C8500 빠른 참조 매뉴얼 - 페이지 5
{카테고리_이름} Epson AcuLaser C8500에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson AcuLaser C8500 21 페이지. Epson aculaser c8500: quick start
Epson AcuLaser C8500에 대해서도 마찬가지입니다: 포장 풀기 매뉴얼 (20 페이지)
페이지 인쇄
7.
Take the new photoconductor unit out of its
package and unwrap the protective sheet while
holding the handle as shown below.
8.
Holding the photoconductor unit by its handle,
place the unit on the guide rails and push it all the
way into the printer.
9.
Turn the small lever to the left.
10. Turn the large lever 90 degrees clockwise.
11. Close the front cover.
Replacing the waste toner collector
The waste toner collector is sold as part of the
photoconductor unit because it usually needs
replacement at the same time as the photoconductor
unit. However, the waste toner collector is also sold
individually as sometimes you may need to replace the
waste toner collector separately depending on use.
Follow these steps to replace the waste toner collector:
1.
Open the front cover.
2.
Hold the handle of the waste toner collector and
push the tab down to release the lock.
5 5 5 5