Epson AcuLaser CX11F 기본 작전 구드 - 페이지 6

{카테고리_이름} Epson AcuLaser CX11F에 대한 기본 작전 구드을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson AcuLaser CX11F 26 페이지. Aculaser cx11 series

Epson AcuLaser CX11F 기본 작전 구드
e. l Left/ r Right button Use these buttons to sequentially display previous or next setting values.
u Up/ d Down button Use these buttons to sequentially display previous or next menu items.
f. Advanced/Menu
button
g. Speed dial button
(fax model only)
h. Pause/Redial button
(fax model only)
i. x B&W Start button,
x Color Start button
j. y Cancel button
k. Numeric keypad
l.
Reset button
m. Setup light
n.
Setup button
o. Mode buttons
p. Mode lights
EPSON AcuLaser CX11 Series Basic Operation Guide
The r Right button is also used as the OK button to set and register a
setting item.
Use this button to display the advanced menu for each mode.
Use this button to display a list of registered recipients in the LCD panel.
Use this button to insert a pause into fax dialing, or redial to the same
fax number called previously.
Use these buttons to start a black-and-white or color copy, scan, or fax
transmission.
When the error light is flashing, pressing this button clears the error and
switches the product to ready status.
Use this button to stop scanning operation, or cancel copy, fax
transmission and print job.
Pressing it once cancels the current job.
Pressing and holding it for more than three seconds in Print mode
deletes all print jobs from the product memory.
Used to enter the number of copies, or enter a zoom value.
# hash and ✽ asterisk buttons can be used in Fax mode.
Use this button to reset the selected setting item to the default value.
Press and hold it for more than three seconds to delete all setting items
to their default values. Also, used as a delete button to delete one
character from the entered data when entering a recipient fax number
in Fax mode.
On when the product is in Setup mode.
Use this button to switch to the Setup mode.
Use these buttons to switch to the corresponding mode.
On when the corresponding mode (Print, Copy, Fax, or Scan) is selected.
When the Print light is on, the product is in Print mode and ready to
receive and print data.
Product Parts
6