Epson AcuLaser CX11N 기본 작전 구드 - 페이지 16

{카테고리_이름} Epson AcuLaser CX11N에 대한 기본 작전 구드을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson AcuLaser CX11N 26 페이지. Multi-function colour laser printers
Epson AcuLaser CX11N에 대해서도 마찬가지입니다: 사용자 설명서 (17 페이지), 사양 (4 페이지), 설정 매뉴얼 (32 페이지), 여기에서 시작하기 매뉴얼 (8 페이지), 보충 설명서 (6 페이지), 업데이트 (1 페이지), 제품 지원 게시판 (5 페이지), 사양 (4 페이지)

Troubleshooting

If paper becomes jammed in the product, the

Print light (green) goes off and Error light

(red) is lit. The product's LCD panel and

EPSON Status Monitor 3 provide alert

messages.

Clear the paper jam by following the order

of the indicated cover names displayed on

the control panel or EPSON Status

Monitor 3.

Be sure to observe the following points when

you clear jammed paper.

❏ Do not remove jammed paper by force.

Torn paper can be difficult to remove

and might cause other paper jams. Pull

it gently in order to avoid tearing.

❏ Always try to remove jammed paper

with both hands to avoid tearing it.

❏ If jammed paper is torn and remains in

the product, or if paper is jammed in a

place not mentioned in this guide,

contact your dealer.

❏ Make sure that the paper type that is

loaded is the same as the Paper Type

setting in the printer driver.

EPSON AcuLaser CX11 Series Basic Operation Guide

Warning:

❏ Be careful not to touch the fuser,

which is marked CAUTION HIGH

TEMPERATURE, or the surrounding

areas. If the product has been in use,

the fuser and the surrounding areas

may be very hot.

❏ Do not insert your hand deep into the

fuser unit as some components are

sharp and may cause injury.

Follow the steps below to clear paper jams at

cover C.

1. Raise the scanner unit.

Troubleshooting