ArcEquine ArcEquine 사용자 설명서 - 페이지 9

{카테고리_이름} ArcEquine ArcEquine에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ArcEquine ArcEquine 12 페이지.

Selecting treatment programme

First choose the treatment programme you

wish to deliver (see guide on page 6).

If you are not treating a specific condition

but using ArcEquine as part of a maintenance

and prevention regime, we recommend that

you first go through 'Standard initiation'

programmes 1, 2 and 3.

At the top of the unit there are four

treatment programme LED's.

To select your treatment programme,

press the left-hand button, and cycle

through the LED's until the chosen

treatment programme is lit.

Once the treatment programme has been

selected you will hear a sequence of short,

sharp beeps. The number of beeps indicates

the treatment programme selected.

For example; Three beeps = Programme three.

If the unit has already been used, the red LED

will indicate the last treatment programme

delivered.

Once the desired treatment programme

has been selected, press the right-hand

button once and the unit will begin

delivery of the treatment.

Once activated, the left-hand button

will turn off and the right-hand button and

programme indicator will turn either:

Green:

To indicate complete connectivity.

Red:

To indicate no connectivity at one

or more of the ArcPads.

After 30 seconds the right-hand button

will turn off and the programme indicator

will begin to flash and continue to do so

throughout the delivery period.