Digiever DS-1136 Pro Series 빠른 설치 매뉴얼 - 페이지 8
{카테고리_이름} Digiever DS-1136 Pro Series에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digiever DS-1136 Pro Series 11 페이지. Ds-2100 pro series
Digiever DS-1136 Pro Series에 대해서도 마찬가지입니다: 빠른 설치 매뉴얼 (10 페이지)
페이지 인쇄
Connect to NVR
1. Connect to NVR
After setting the EZ Search and S-NVR Decoder, the user can connect to
the monitoring page by the following two options:
1)
EZ Search
Once you click "Connect" or double click the selected NVR list, the IE
browser will pop up automatically.
2)
IE browser
Log in to the system by entering its IP address in IE browser.
Note: There are 2 methods to set network:
Obtain an IP address automatically (NVR Default)
Obtain an available dynamic IP address assigned by a DHCP server. If
this option is selected, NVR will automatically obtain an available dynamic
IP address from the DHCP server once it connects to the network.
Specify an IP address
If there is no DHCP server existing in network environments, the static IP
address will be given as 192.168.1.245. It should be adaptable in most
networking environment, and user can choose to maintain the default IP
address or change it in this page. However, it's recommended setting
different IP address of NVR if there is more than one NVR in the same
LAN.