Digiever DS-1200 Series 빠른 설치 매뉴얼 - 페이지 12

{카테고리_이름} Digiever DS-1200 Series에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digiever DS-1200 Series 16 페이지.

③ Connect to NVR

1. Connect to DIGIEVER NVR

After setting the NVR Search and NVR Decoder, user can connect to the

monitoring page by the following two options:

(1) NVR Search

Once you click "Connect" or double click the selected NVR list,

the IE browser will pop up automatically.

(2) Web browser (IE, Chrome, Firefox, Opera)

Note: There are 2 methods to set network:



Obtain an IP address automatically (NVR Default)

Obtain an available dynamic IP address assigned by a DHCP

server. If this option is selected, DIGIEVER NVR will automatically

obtain an available dynamic IP address from the DHCP server

once it connects to the network.



Specify an IP address

If there is no DHCP server existing in network environments, the

static IP address will be given as 192.168.1.245. It should be

adaptable in most networking environment, and user can choose

to maintain the default IP address or change it in this page.

However, it's recommended setting different IP address of

DIGIEVER NVR if there is more than one DIGIEVER NVR in the

same LAN.