Epson AP-3250 제품 지원 게시판 - 페이지 6
{카테고리_이름} Epson AP-3250에 대한 제품 지원 게시판을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson AP-3250 22 페이지. Product support bulletin(s)
Epson AP-3250에 대해서도 마찬가지입니다: 제품 지원 게시판 (20 페이지), 제품 지원 게시판 (5 페이지), 제품 지원 게시판 (16 페이지)
페이지 인쇄
2 0 .
Q. Why is the AP-3250's parallel cable connector located on the side of the
printer instead of the rear like most other printers?
A. Since the AP-3250 may be operated in two different positions it was
necessary to relocate the parallel cable connector to the side of the
printer.
21.
Q. Can different fonts be selected on the AP-3250's front panel?
A. Yes, different fonts may be selected from the AP-3250's front panel by
using the font button. However, all font selections made from the front
panel can be overridden by an software application program. The
recommended method to select fonts is through the program that you are
using to print. If the program does not provide font selection abilities, then
the printer's font panel is very useful.
22. Q. When printing high density (360 x 360 DPI) bit-image graphics why does
ink smearing sometimes occur on the outside edges of the printout with
certain print patterns?
A. The AP-3250 builds the graphic image by making multiple passes when
printing high density graphics. Dependant upon the printed pattern and
the ink absorption factor of the paper being used, ink smearing may occur
on the edges of the printed pattern. This occurrence is much less
noticeable when printing at resolutions lower than 360 x 360 DPI. Should
this phenomenon be encountered, select a lower graphic resolution in your
software program.
PSB No: P-0084A
Page: 6 of 6