Epson Artisan 710 Series 네트워크 설치 매뉴얼 - 페이지 16

{카테고리_이름} Epson Artisan 710 Series에 대한 네트워크 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson Artisan 710 Series 36 페이지. Color inkjet printer
Epson Artisan 710 Series에 대해서도 마찬가지입니다: 여기에서 시작 (4 페이지), 사양 (2 페이지), 여기에서 시작하기 매뉴얼 (8 페이지), 서비스 매뉴얼 (20 페이지)

페이지 인쇄

4. Wait for the printer to connect to your wireless network (this can take up to

90 seconds).

Once it's connected, you see the

on the printer's control panel.

5. Continue with "Install Software" on page 24.

Note:

If the printer doesn't connect to your wireless network after 90 seconds, the SSID,

WEP key, or WPA passphrase may have been entered incorrectly. See "Connect

Wirelessly Using Advanced Setup" on page 9 to select your network settings again.

If the printer still doesn't connect to your wireless network, see "The printer cannot find

or connect to the wireless router or access point" on page 31.

Create an Ad-Hoc Wireless Connection

Use this setup method if you want to print wirelessly but do not have an access

point or router.

Important:

For Windows

cable, you need to disconnect it before installing software. When setup is complete,

reconnect your computer's Ethernet cable.

For Macintosh

cable or you use a modem for Internet access, you cannot set up your printer this way.

See "Connect Wirelessly Using the Setup Wizard" on page 5 or "Wired (Ethernet)

Installation" on page 23 to set up your printer.

1. Select

Wireless Network Installation

users: If your computer is connected to a network with an Ethernet

on the printer's control panel, then press

Setup

WiFi icon and a signal strength indicator