Epson Artisan 710 Series 네트워크 설치 매뉴얼 - 페이지 20
{카테고리_이름} Epson Artisan 710 Series에 대한 네트워크 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson Artisan 710 Series 36 페이지. Color inkjet printer
Epson Artisan 710 Series에 대해서도 마찬가지입니다: 여기에서 시작 (4 페이지), 사양 (2 페이지), 여기에서 시작하기 매뉴얼 (8 페이지), 서비스 매뉴얼 (20 페이지)
페이지 인쇄
10. Press
OK
11. Continue with the next section.
Choose Security Settings
1. Press u or d to select the security mode you want to use for the Ad Hoc
wireless network, then press
Note:
If you don't want to enable security for your Ad Hoc network, select None, then
press OK.
2. Do one of the following:
■
If you selected
Settings and Connect to the Network" on page 22.
■
If you selected WEP as the security mode, continue with step 3.
3. Create a WEP key for the Ad Hoc network. The WEP key can be in
alphanumeric (ASCII) format (recommended) or hexadecimal format.
Note:
An alphanumeric WEP key must be 5 or 13 characters. A hexadecimal WEP key
must be 10 or 26 characters.
4. Press u or d to select
Hexadecimal
20
Wireless Network Installation
to select the default channel for your Ad Hoc network.
as the security mode, continue with "Confirm Your
None
Alphanumeric
if your WEP key is in hexadecimal format.
.
OK
if your WEP key is ASCII, or select