Epson Artisan 837 빠른 매뉴얼 - 페이지 31

{카테고리_이름} Epson Artisan 837에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson Artisan 837 44 페이지. Color inkjet printer
Epson Artisan 837에 대해서도 마찬가지입니다: 시작 매뉴얼 (4 페이지), 여기에서 시작 (4 페이지), 사양 (2 페이지), 여기에서 시작 (4 페이지), 여기에서 시작 (2 페이지), 자주 묻는 질문 (4 페이지), 서비스 매뉴얼 (20 페이지)

페이지 인쇄

WiFi light is on but you can't print

■

Your router might not be assigning IP addresses automatically using DHCP. If it isn't,

you will need to set the product's IP address manually. Make sure it is set correctly for

your network. Contact your router manufacturer for assistance.

■

Make sure your firewall or security software is not set to block port 3629 (TCP/

UDP). Contact your firewall manufacturer for assistance.

Printing is slow or the print is cut off

Print a Network Status Sheet (see below) and check the signal strength. If it's poor, try

moving the product closer to your wireless router or access point. Avoid placing the

product next to a microwave oven, 2.4 GHz cordless phone, or large metal objects such as

a filing cabinet.

Cannot scan over the network

■

Epson Scan is not available in Mac OS X 10.6; see page 22 for scanning instructions.

■

If you cannot scan from the product's touch panel, make sure you restarted your

computer after installing the product software. Make sure Epson Event Manager is

not being blocked by your firewall or security software.

■

If you are scanning a large document at high resolution, a communication error may

occur. If the scan did not complete, lower the resolution.

■

If network communication was interrupted while starting Epson Scan, exit Epson

Scan, and restart it after a few seconds. If Epson Scan cannot restart, turn the product

off and on, and then try again. Check the

. For details, see the Epson Scan Help.

Settings

Print a Network Status Sheet

Press

Home

Press l or r to select

Press x

twice to print the status sheet.

Start

Printing and Copying Problems

■

Make sure your paper is loaded printable side facedown (usually the whiter, brighter,

or glossy side). Make sure paper is loaded under the edge guides.

, if necessary, then press l or r and select

Wi-Fi/Network Settings

Confirm Wi-Fi/Network Settings

Timeout Setting

EPSON Scan

Setup

Solving Problems