Epson C11C418001 - Stylus C60 Inkjet Printer 여기에서 시작 - 페이지 3
{카테고리_이름} Epson C11C418001 - Stylus C60 Inkjet Printer에 대한 여기에서 시작을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson C11C418001 - Stylus C60 Inkjet Printer 4 페이지. Ink jet printer
Epson C11C418001 - Stylus C60 Inkjet Printer에 대해서도 마찬가지입니다: 사용자 설명서 (11 페이지), 첫 번째 매뉴얼 읽기 (12 페이지), 사양 (2 페이지), 적합성 선언 (2 페이지)
페이지 인쇄
5
5
Load Paper
1
Load some paper behind the tabs
inside the edge guides.
2
Press in the locking tab on the left edge guide
and slide it to the edge of the paper stack.
3
Pull out the output tray extension.
6
6
Install Software
If you're using Windows
Then follow the right set of instructions for your system.
Windows 95, 98, Me, and 2000
Your computer may have the EPSON printer software already installed.
Make sure the printer is turned on, then turn on your computer.
If you see this message
Your software is already installed. Click OK. You're ready to start
printing! Or, go to section 7 to install optional programs.
If you see this screen
Click Cancel.
Then follow the steps below to install the
printer software:
1
When you see the Windows icons on your monitor, put the
EPSON CD-ROM in your CD-ROM or DVD drive.
2
Double-click
My Computer, double-click
then double-click
3
Read the license agreement and click Agree.
4
At the Main Menu, click Install Printer Driver.
The files are copied to your computer.
5
If you see a screen asking you to turn on the printer, make
sure the printer is connected and turned on. Wait a minute
until the screen disappears. Do not click Stop searching.
More files are copied.
6
When setup is complete, click OK.
The EPSON Product Registration screen appears.
7
Register your printer as instructed.
At the last screen, click Done or close your browser.
Now you're ready to install optional programs.
Go to section 7.
Windows XP
Your computer may have the EPSON printer software already installed.
Make sure the printer is turned on, then turn on your computer.
If you see a message that
your new hardware is installed and ready,
you can start printing right away. Or, go to section 7 to install
optional programs.
If you see this screen
Click Cancel.
Then follow the steps below to install the
printer software:
1
When you see the Windows icons on your monitor, put the
EPSON CD-ROM in your CD-ROM or DVD drive.
2
If you see a screen asking What do you want
Windows to do?, click Cancel.
3
Click Start, click
then double-click
4
Read the license agreement and click Agree.
5
At the Main Menu, click Install Printer Driver.
Wait while the files are copied to your computer.
6
If you see this screen, make sure the printer is connected
and turned on, then click Stop searching. More files
are copied.
7
When you see a message that setup is complete or the printer
port has been set, click OK. The EPSON Product Registration
screen appears.
8
Register your printer as instructed.
At the last screen, click Done or close your browser.
Now you're ready to install optional programs.
Go to section 7.
®
, check to see which version you have.
EPSON.
My Computer, double-click
EPSON.
2
EPSON,
EPSON,
1
3