Epson C11C605001 - DFX 9000 B/W Dot-matrix Printer 사용자 설명서 - 페이지 17
{카테고리_이름} Epson C11C605001 - DFX 9000 B/W Dot-matrix Printer에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson C11C605001 - DFX 9000 B/W Dot-matrix Printer 28 페이지. User guide - remote configuration manager
Epson C11C605001 - DFX 9000 B/W Dot-matrix Printer에 대해서도 마찬가지입니다: 사양 (2 페이지), 펌웨어 업데이트 (1 페이지), 사용자 설명서 (15 페이지)
페이지 인쇄
Chapter 3
Using the Control Panel
This chapter describes the buttons and lights on the control panel, plus:
Selecting a font and pitch
Changing the printer's default settings
Locking the control panel buttons
Buttons and Lights
a
b
c
d
e
f
g
Button/Light
Function
a
Front Tractor
On when the front tractor is selected. The light is green when
Select light
paper is loaded, or red when the tractor is out of paper.
b
Rear Tractor
On when the rear tractor is selected. The light is green when
Select light
paper is loaded, or red when the tractor is out of paper.
c
Front/Rear
Selects the front or rear tractor. If you have been using paper
tractor button
loaded on one tractor, first remove the printed output before
pressing this button to switch the tractor.
m
h
i
j
k
l
Button/Light
Function
d
Font (ItemU)
Selects one of the fonts. See "Selecting a Font and Pitch" on
button
page 18.
In SelecType mode and Default-setting mode, you can press
the ItemU button to select the previous menu or option.
See page 19 or page 21 for details.
e
Reset
When you press both the Font and Pitch buttons
(Font and Pitch)
simultaneously, the printer clears its buffer and restores its
buttons
default settings.
f
Pitch (ItemD)
Selects one of the pitch settings. See page 18 for more
button
information.
In SelecType mode and Default-setting mode, you can press
the ItemD button to select the next menu or option.
See page 19 or page 21 for details.
g
Tear Off (SetU)
Feeds continuous paper forward to the tear-off position.
button
In SelecType mode and Default setting mode, you can press
the SetU button to select the previous option for a menu item.
See page 19 or page 21 for details.
Tear Off light
On when paper is in the tear-off position.
h
Menu
When you press the Tear Off and Top of Form buttons at the
(Tear Off and
same time, the printer enters or exits the SelecType mode and
Top of Form)
you can set the various printer settings. See page 19 or page 21
buttons
for details.
i
Top of Form
Enters the top-of-form position mode and sets the new
(SetD) button
top-of-form position after it has been adjusted with the
Micro Feed buttons.
In SelecType mode and Default-setting mode, you can press
the SetD button to select the next option for a menu item.
See page 19 or page 21 for details.
Top of Form light
On when the printer is in top-of-form and tear-off modes.
j
LF/FF Load
Loads continuous paper when the printer is out of paper.
button
Feeds paper line by line when pressed briefly.
Advances continuous paper to the next top-of-form position
when held down for a few seconds.
k
Micro Feed
Adjust the paper position, such as the top-of-form position and
buttons
tear-off position.
Using the Control Panel 17