Epson C11C605001 - DFX 9000 B/W Dot-matrix Printer 사용자 설명서 - 페이지 6
{카테고리_이름} Epson C11C605001 - DFX 9000 B/W Dot-matrix Printer에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson C11C605001 - DFX 9000 B/W Dot-matrix Printer 28 페이지. User guide - remote configuration manager
Epson C11C605001 - DFX 9000 B/W Dot-matrix Printer에 대해서도 마찬가지입니다: 사양 (2 페이지), 펌웨어 업데이트 (1 페이지), 사용자 설명서 (15 페이지)
페이지 인쇄
Connecting the Power Cord
Make sure the printer is turned off.
Then plug the power cord into the
AC inlet on the back of the printer
and connect the other end to a
properly grounded electrical outlet.
Connecting the Printer to Your Computer
You can connect your printer using the following interfaces:
IEEE-1284-compatible parallel interface (use a shielded, twisted-pair
parallel cable with a 36-pin Centronics
USB (Universal Serial Bus) interface (use a shielded USB cable)
RS-232C serial interface (use a null modem cable)
Type-B optional interface (see the Reference Guide to install an optional
interface card)
Note:
You can connect to multiple interfaces simultaneously; the printer switches interfaces
automatically when it receives data.
1.
Make sure your printer and computer are turned off.
2.
Open the printer's interface cover.
6 Connecting the Power Cord
compatible connector)
®
3.
Use the appropriate cable to connect the printer to your computer.
USB
IEEE1284 (PARALLEL)
RS-232C (SERIAL)