Aybey Elektronik CBCT 프로그래밍 및 설치 매뉴얼 - 페이지 2

{카테고리_이름} Aybey Elektronik CBCT에 대한 프로그래밍 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aybey Elektronik CBCT 4 페이지. Custom design lcd display board

GENERAL FEATURES

CBC/CBCT/CBP are a custom-design Horizontal RGB LCD display system designed to use for Lift

cabin and landing. It needs 12-24V DC supply. CBC and CBCT get all information from CANBus.

CBC is used for fault tolerant applications, CBCT is used for high speed applications. CBP board can

be applied up to 64 stops with 6 gray-code / binary code inputs as M0,...,M5 or counter systems inputs

as M0, 817, 818. It also includes 5 signal inputs as 12 (Busy), 31 (Down Arrow), 32 (Up Arrow), 35

(Overload) and 39 (Inspection). Galvanically isolated inputs can be driven by positive or negative

voltage. Reverse of input voltage is selected from common terminals COM1 and COM2.

Full character screen and related graphical symbols are shown below:

After initialization, software version number and ID (in CBC and CBCT) is displayed first. Then

inputs are evaluated and related character(s) are displayed according to stored settings. If no input is

connected or all connected inputs are passive then stop 0 character(s) are displayed.

When signal input(s) are activated related symbol is displayed on left side. Gray code inputs drive 2

digit characters on right side, indicating floor information. For floor indicating displays, all capital

letters, numbers, - sign in dot-matrix segments format can be chosen as left and right digit for up to 64

floors.

F/7.5.5.02.104 R:1

CBC /CBCT /CBP