Aybey Elektronik UL180 사용자 설명서 - 페이지 2

{카테고리_이름} Aybey Elektronik UL180에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aybey Elektronik UL180 8 페이지. Emergency power supply for lifts

1-General Description

UPSLIFT is an uninterruptable power supply designed for lift applications. It has been designed

to supply energy to the controller as well as to all peripherals such as doors, brakes, etc. in

case of any power breakdown. It does not supply any energy to the motor. Therefore, in a

system where UPSLIFT is used as emergency power supply then the motor should be fed either

by batteries or by another UPS. UPSLIFT makes use of five 12V dry batteries. It can be used in

all kinds of controllers.

2- Warning and Remarks

 Read user manual before starting to install the device.

 Do not connect or disconnect any wire from terminals of the device when it has been

energized.

 Place the device into the controller box by leaving suggested distances around the

device according to figure 2.1. Otherwise the device may suffer from excessive heat.

 Do not store and run the device in water or in excessive cold, hot, moisty and dusty

environments and where chemical gases are present. (see technical specifications)

 Do not mount the device to be exposed to direct sunlight.

Figure 2.1: Recommended Mounting Distance [mm]