Aybey Elektronik UPSLIFT 사용자 설명서 - 페이지 5

{카테고리_이름} Aybey Elektronik UPSLIFT에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aybey Elektronik UPSLIFT 8 페이지. Emergency power supply for lifts

4- BATTERY AND WIRE SELECTION GUIDE

There should be 5 x 12V batteries as energy source for UPSLIFT. Battery charge capacities

should be minimum 4 Ah. However when the batteries are used at the same time as the

energy source by the traction motor, then the current taken from the batteries by the motor

should be taken into account for selecting the charge capacity of the batteries. Table 3.2 shows

the required wire cross sections and battery capacities related to the motor powers.

Traction Motor Power

4kW – 5.5kW

5.5kW – 11kW

11kW-15kW

15kW-22kW

Table 4.1 Battery and Wire Selection Table

Battery Charge Capacity

4 Ah

7 Ah

12 Ah

17 Ah

Battery Wire Cross-Section

2.5 mm

4 mm

6 mm