Archgard 31-LS-GT 설치 매뉴얼 - 페이지 4

{카테고리_이름} Archgard 31-LS-GT에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Archgard 31-LS-GT 16 페이지. Log sets for installation in 345-dvte31ln-1

Step 2: Place Log 02 on other two pins in the back of the firebox.

Figure 05:

Step 3: Install the log bracket in the holes on the left side of the burner using the two (2) black tek screws included in the manual bag.

Figure 07:

Step 4: Spread some embers along the back side of the burner.

Do not place embers with a flat edge down as it may block burner

ports.

DO NOT block the gap at the back of the burner as this

supplies secondary air to the fireplace.

Figure 09:

Installation

Figure 06:

Figure 08:

Keep the embers away from the pilot opening. Do NOT block the

ports immediately in front of the pilot.

Figure 10: