Ayce YF01-7 매뉴얼 - 페이지 14

{카테고리_이름} Ayce YF01-7에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ayce YF01-7 18 페이지.

DESCRIPTION OF THE SYMBOLS

Before any use, refer to the corresponding section in this user manual.

In accordance with european directives applicable to this product.

Class II symbol: this appliance is designed with double insulation. It is not necessary to

connect it to earth connection.

Warning: to avoid overheating, do not cover.

Caution, hot surface.

Recycle unwanted materials instead of disposing of them. All appliances and packaging

should be sorted and tendered at a regional recycling centre and be processed in an

ecological manner.

1. Read all instructions carefully before using.

2. Make sure the voltage is the same as indicated on the

rating plate of the appliance.

3. Do not operate this appliance if the cable or plug becomes

damaged.

4. Keep the appliance and cable away from sources of heat,

sharp objects or anything that may cause damage.

5. If the supply cord is damaged, it must be replaced by the

manufacturer, its service agent or similarly qualifi ed

persons, in order to avoid a hazard.

6. Ensure the appliance is switched off before connecting to

the mains power supply.

7. Switch off the power supply and disconnect from

mains supply when not in use, before cleaning or other

maintenance.

8. To disconnect the appliance, switch it "OFF", and then

remove the plug from outlet. Do not pull the cord to

disconnect the plug.

9. The heater must not be located immediately below a

socket-outlet.

10. Do not operate in areas where gasoline, paint or other

fl ammable liquids are used or stored.

11. Indoor use only.

12. In order to avoid overheating, do not cover the heater.

13. To prevent a possible fi re, do not block air intakes or

exhaust in any manner.

14. Don't touch the hot surfaces.

26 | 27