FHC ZEPHYR ZEP03 빠른 시작 매뉴얼
{카테고리_이름} FHC ZEPHYR ZEP03에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. FHC ZEPHYR ZEP03 2 페이지. Wall mounted inswing hinge
페이지 인쇄SHOWER HINGE TEMPLATE
ZEPHYR
Wall Mounted Inswing Hinge
ITEM NO. ZEP03
SPECIFICATIONS
SPECIFICATIONS
3/8" (10 mm) Tempered Glass Only
Glass Sizes:
Stainless Steel or Solid Brass
Construction:
Free Swinging - must be used with a Door Stop.
Closing Type:
See Page 6
Cutout Required:
Hinge body, glazing gaskets, wall mounting screws, allen
Includes:
head/phillips head cover plate screws, and fabrication template.
Residential Bath and Commercial Hotel Applications
Use:
GASKET SPECIFICATIONS:
For 3/8" (10 mm) Glass: Use One Thick Gasket On Each Side
GLASS INSTRUCTIONS:
Only use tempered safety glass. To prevent damage to the hinge finish
during installation, do not use power tools when installing these hinges.
IMPORTANT INFORMATION:
The Zephyr Series Hinge is a Free-Swinging Hinge. Zephyr Series Hinges have
no self-centering mechanism and must be used with a Door Stop. Hinges swing
in one direction only.
MAXIMUM DOOR
CAPACITY
DOOR WEIGHT
USING 2 HINGES
100 LBS. (45 kg)
USING 3 HINGES
150 LBS. (68 kg)
NOTE: Do not exceed either maximum weight or width when choosing proper quantity of hinges.
FRAMELESS HARDWARE COMPANY
3/8" (10 mm) GLASS
Approx. 5 lb/ft
2
DOOR WIDTH
36" (813 mm)
40" (1066 mm)
P.O. Box 1906, South Gate, CA 90280
1-3/16"
(30 mm)
1-7/8"
(47 mm)
CARE & CLEANING GUIDELINES:
For best results, keep the following recommendations in mind when caring for your FHC shower door hardware.
Your shower door should be dried daily with a soft towel or cloth to ensure its original finish. Do not use harsh
cleaners or chemicals on the hardware, as many of the components are coated with a clear lacquer that will
become damaged beyond repair. Always test your cleaning solution in an inconspicuous area prior to cleaning
the entire hardware surface. Wipe surfaces clean using a soft, dampened cloth or sponge, and rinse completely
with warm water immediately after applying the cleaning solution. Use only small amounts of liquid, gentle,
cleaner. Never use abrasive products, sponges, or wire scrub brushes while cleaning hardware.
MAINTENANCE:
FHC's hinges come factory greased for a silent, hassle-free experience.
If there is any noticeable squeaking that occurs after installation, it is recommended
to apply a few drops of (3 in 1) multi-purpose oil to the hinge, at the nylon washer/pivot
location. The lubricant will penetrate the hinge crevices, reducing friction, cleaning
grime, and/or buildup. Spray lubricants are prohibited. If, for some reason, the hinge
is disassembled during maintenance, use a small amount of white lithium grease
to lubricate the interior hinge components.
Toll Free: (888) 295-4531 | Fax: (323) 336-8307 | Web: fhc-usa.com
PROFESSIONAL GRADE
36"
36"
MAX
MAX
WIDTH
WIDTH
2-HINGES
2-HINGES
MAX
100
LBS
3-1/8"
(79 mm)
SEE TEMPLATE ON BACK
SEE TEMPLATE ON BACK
Refer to Dimensions Shown
Refer to Dimensions Shown
to Ensure Accuracy
to Ensure Accuracy
EXPERIENCE AND INNOVATION
LIT0229C REV. 11.30.22 PG 1 OF 2
40"
36"
MAX
MAX
WIDTH
WIDTH
3-HINGES
3-HINGES
MAX
150
LBS