FHC STar 66-MP-IR 사용 설명서 - 페이지 8
{카테고리_이름} FHC STar 66-MP-IR에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. FHC STar 66-MP-IR 9 페이지. For microtargeting platforms
페이지 인쇄
5. Remove platform and drill burr hole.
6. Reattach platform.
7. Attach center drive positioner to center hub with tab oriented 45°, 90°, or 135° relative to screw.
Make sure positioner is completely seated in the hub.
a
8. Attach drive to positioner and secure following drive instructions.
9. Perform MER and implant lead.
10. Remove drive from positioner, then remove platform.
11. Use the standoff wrench to support the standoff while twisting the driver clockwise to secure it
to the standoff. Turn standoff wrench counterclockwise to remove standoff.
a
12. Use the anchor wrench to support the anchor while twisting the driver clockwise to secure it to
the anchor. Turn anchor wrench counterclockwise to remove anchor.
a
13. Dispose of used anchors, Standoffs and thumbknobs according to hospital protocol.
Page 8 of 9
b
b
b
L011-44
c
c
c
Rev. E1
d
d
2019-05-13