Epson DM-D500 Series 설치 매뉴얼 - 페이지 25

{카테고리_이름} Epson DM-D500 Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson DM-D500 Series 38 페이지. Customer display
Epson DM-D500 Series에 대해서도 마찬가지입니다: 제품 설명서 (27 페이지), 설치 매뉴얼 (42 페이지), 사양 시트 (2 페이지), 설치 매뉴얼 (37 페이지), 여기에서 시작 (2 페이지)

페이지 인쇄
Epson DM-D500 Series 설치 매뉴얼
The jumpers are located as shown in illustration 67.
Precautions on using the power supply unit
To avoid damage to the DM-D500 and the power supply unit, note
the following points.
Use the optional Seiko Epson products, PS-170, PA-6508,
PA-6511, PA-6513, PB-6509, or PB-6510, as the power supply.
Never connect the DC cable to the power supply unit when the
power supply unit is connected.
Unplug the DC cable by holding the connector part. If you pull
the cable to unplug it, it may be damaged.
Assembling
1. Pass the cable for the DM-D500 through the DM-D stand as
shown in illustration 68. When raising the height of the DM-D
stand, attach the extension support (DP-105) to the DM-D stand
as shown in illustration 69.
67
68
69
DM-D500 Installation Guide 23
English
when using the
extension support
(DP-105)