Epson DM-D500 Series 설치 매뉴얼 - 페이지 28

{카테고리_이름} Epson DM-D500 Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson DM-D500 Series 37 페이지. Customer display
Epson DM-D500 Series에 대해서도 마찬가지입니다: 제품 설명서 (27 페이지), 설치 매뉴얼 (42 페이지), 사양 시트 (2 페이지), 설치 매뉴얼 (38 페이지), 여기에서 시작 (2 페이지)

페이지 인쇄
Epson DM-D500 Series 설치 매뉴얼
English
7. Connect the DC cable of the power supply unit (with the arrow
mark up) to the power supply unit connector indicated with
"POWER IN" on the DM-D stand as shown in illustration 65.
power supply unit
connector
65
8. When using as a standalone product, set the jumpers as shown
in "Jumper settings" on page 22.
9. Arrange the cables as shown in
illustration 66. Put the cables for the
DM-D500 inside the DM-D stand.
10. Attach the base plate to the DM-D stand following the numbers
of the arrows shown in illustration 67. Then, push the base
plate until it is locked by the hook on the DM-D stand.
11. When the extension support (DP-105) is used, attach Velcro
tapes to the four corners of the plate to keep it from falling
down.
12. Connect the cord of the power unit to the socket.
26 DM-D500 Installation Guide
67
DC cable of
power supply unit
66