ARCHIPELAGO LIGHTING LEMX 설치 매뉴얼 - 페이지 3
{카테고리_이름} ARCHIPELAGO LIGHTING LEMX에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ARCHIPELAGO LIGHTING LEMX 5 페이지.
페이지 인쇄LEMX - Installation Guide
Ceiling Mount: LEMX-L2Sx
1. Using a flat screwdriver, remove the front cover, remove
and discard the canopy kit.
2. Feed excess wires into the junction box.
3. The system can accept input voltages of 120 VAC
or 277 VAC. Therefore connect the black/red wire (line
voltage) and the white wire (neutral) leads to the building
utility. Connect the green ground.
4. Using the junction box screws to mount spider plate
onto junction box.
5. Install the canopy to junction box.
6. Mount the unit securely to the canopy.
7. Snap the EXIT plate to the unit.
5.
|
Headquarters: 4615 State Street, Montclair, CA 91763
|
Production Center: 7345 Syncamore Canyon Blvd, Riverside, CA 92508
1, 2, 3.
4.
6.
7.
archipelagolighting.com
+1(866) 912-3220