CREE LIGHTING Noctura Series 설치 지침

{카테고리_이름} CREE LIGHTING Noctura Series에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. CREE LIGHTING Noctura Series 2 페이지. Led area lights
CREE LIGHTING Noctura Series에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (10 페이지), 설치 지침 매뉴얼 (6 페이지)

CREE LIGHTING Noctura Series 설치 지침
When using electrical equipment, basic safety precautions should always be followed including the following:
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
1.
DANGER- Risk of shock- Disconnect power before installation.
DANGER – Risque de choc – Couper l'alimentation avant l'installation.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
TO INSTALL:
1
NTA (11L)
Remove the (4) Screws
INSTALLATION
STEP 1:
Remove the (4) Phillips head screws on the back of the luminaire and discard screws. See Figure 1.
STEP 2:
Locate the bird spike frame on the back of the luminaire, aligning the screws included with the bird spike accessory with the holes in luminaire. Tighten
screws to 20 in-lbs (2.2 N·m)
© 2019 Cree Lighting, A company of IDEAL INDUSTRIES. All rights reserved. For informational purposes only. Content
is subject to change. See www.creelighting.com/warranty for warranty and specifications. Cree
registered trademarks of Cree, Inc.
1 of 1
IMPORTANT SAFEGUARDS
NTA (19L)
Remove the (4) Screws
and the Cree logo are
®
Noctura Series
LED Area Lights
INSTALLATION INSTRUCTIONS
INSTRUCTIONS D'INSTALLATION
NTA (35L)
Remove the (4) Screws
www.creelighting.com
LPN00636X0001A0_B
Bird Spikes