Aydin Displays VFP19S4 사용자 설명서 - 페이지 7
{카테고리_이름} Aydin Displays VFP19S4에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aydin Displays VFP19S4 20 페이지. 19.0-inch amlcd flat panel color monitor, rack mount, panel mount, stainless steel & vesa mount models, touch options: resistive, capacitive, saw
페이지 인쇄1
Introduction
The Model VFP19 AMLCD Monitor is a 19.0-IN diagonal display with a native resolution of 1280 x
1024 (SXGA) pixels. It is available in two brightness levels, a standard brightness level of 300 nits
typical or a high brightness level of 520 nits typical. Inputs are provided for DVI-D, VGA, Composite
(NTSC, PAL or SECAM) Video, and S-Video (NTSC, PAL or SECAM). Generally, all VESA
compatible video formats are supported.
2
Specifications
2.1 Inputs
2.1.1 Power
VFP19 models are available to operate from AC or DC input power: 120/240 AC power version and
a 10-36 VDC power version.
2.1.1.1 AC Input
Connector: IEC 60320 C14
Input Voltage: Universal AC Input Range 90-264 VAC
Input Frequency: 47-63 Hz
Input Power: 24.2 W
2.1.1.2 10-36 VDC input
Connector:
Pinout:
Input Voltage:
Input Power:
2.1.2 DVI
Connector:
Bandwidth:
2.1.3 Analog R-G-B
Connector:
Bandwidth:
Synchronization:
VFP19-901_manual.doc
Monitor: Molex 42179 Plug Housing
Power Cord: Molex # 03-12-1026 Connector
with two # 18-12-1222 Female Terminals for 16-18 AWG Wire
Pin 1 is +VDC (Red Wire)
Pin 2 is Power Ground (Black Wire)
10 – 36 VDC
25 W
Single-Link DVI-D
Supports up to 160 Mhz operation.
HD15 female (Standard VGA pin-out)
Supports up to 165 MHz (UXGA 60 Hz)
Supports separate H & V sync, separate composite sync, and sync on green.
1