Architectural Area Lighting SC4 설치 지침 매뉴얼 - 페이지 15
{카테고리_이름} Architectural Area Lighting SC4에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Architectural Area Lighting SC4 16 페이지.
페이지 인쇄INSTALLATION INSTRUCTIONS
POLE BY AAL
(FOR NON-AAL
POLE, SEE DETAIL
VIEW FOR POLE
BY OTHERS)
FIXTURE
ASSEMBLY
INCOMING
SUPPLY WIRES
(3) WIRE
CONNECTORS
(BY OTHERS)
CONNECTOR
PLUGS
BALLAST
BRACKET
LOCK NUT
AND WASHER
FIXED ARM MOUNTING (FA4/FA5)
INSTALLATION:
1.
TURN POWER OFF.
2.
REMOVE HOUSING COVER BY LOOSENING (2) 1/4-20 CAPTIVE SCREWS.
3.
REMOVE BALLAST BRACKET LOCK NUT AND WASHER, CAREFULLY LOWER
BALLAST ASSEMBLY AND UNPLUG BOTH CONNECTORS. SET BALLAST ASIDE.
4.
PULL INCOMING WIRE LEADS THROUGH WIRE WAY AND SECURE
FIXTURE ASS'Y TO POLE WITH (2) 3/8-16 HEX BOLTS AND LOCK WASHERS.
5. RECONNECT BOTH PLUGS AND SECURE BALLAST ASSEMBLY
WITH LOCK NUT AND WASHER.
6.
MAKE WIRE CONNECTIONS FROM INCOMING SUPPLY TO FIXTURE ASS'Y.
7.
SECURE HOUSING COVER WITH (2) 1/4-20 CAPTIVE SCREWS.
8.
INSTALLATION COMPLETE.
BALLAST SERVICING:
1.
TURN POWER OFF.
2.
REMOVE HOUSING COVER BY LOOSENING (2) 1/4-20 CAPTIVE SCREWS.
3.
REMOVE BALLAST BRACKET LOCK NUT AND WASHER, CAREFULLY LOWER
BALLAST ASSEMBLY AND UNPLUG BOTH CONNECTORS. SERVICE BALLAST.
4.
RE-ASSEMBLE BALLAST AND CONNECTORS, AND SECURE WITH WASHER
AND LOCK NUT.
5.
SECURE HOUSING COVER WITH (2) 1/4-20 CAPTIVE SCREWS.
6.
SERVICE COMPLETE.
16555 East Gale Avenue
City of Industry, CA 91745
(626)968-5666
(2) 3/8-16 HEX BOLTS
(2) SPLIT LOCK WASHERS.
BALLAST ASSEMBLY
(REFERENCE)
HOUSING COVER
(2) 1/4-20 CAPTIVE SCREWS
LAMP COMPARTMENT
BOTTOM HALF
HOUSING
FIXED ARM
ASSEMBLY
HOUSING
COVER
RE-LAMPING:
1.
2.
3.
4.
HOLE 17/32" DIA.
FOR 3/8"-16 THREADED INSERT
(2) PLACES
1"Ø WIREWAY HOLE
DEBURR EDGES
LATCH SLOTS FOR
FINGER ACCESS
TO INSTALL LAMP, INSERT FINGERS INTO SLOTS AND PULL
BOTH LATCHES BACK SIMULTANEOUSLY.
OPEN THE BOTTOM HALF HOUSING AND INSTALL
PROPER LAMP (BY OTHERS).
CLOSE BOTTOM HALF HOUSING.
INSTALLATION COMPLETE.
DATE
APPRVD
8/13/2010
DATE
REV.
CATALOG NUMBER
FA4 / FA5
POLES BY OTHERS
TOP OF POLE
(REF)
6.00"
2.50"
6.00"
MOUNTING HOLE DETAIL
(BY OTHERS)
PART NO.
A96442