AYE Gobee 사용자 설명서 - 페이지 3

{카테고리_이름} AYE Gobee에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AYE Gobee 12 페이지.

Chapter 1

OVERTURE

Electrical wheelchair

SPECIFICATIONS:

1. Flip-Up side panels

2. Backrest

3. Height Adjustable Armrest

4. Joystick

5. Parking Brake Lever

6. Controller

7. Rear Wheel (Drive wheel)

8. Drive Motor

9. Adjustable Footrest

Never stand on the footrests when entering or leaving the Smart Wheelchair.

Ensure that both parking brakes are applied, fold the footrests upward and enter the Smart

Wheelchair from the front. When you are seated, fold the footrest plates back down to

the normal position.

To adjust the armrest height, pull out the spring-loaded plunger on the side panel and pull

or push the armrest upward or downward until the plunger engages in the respective hole

of the vertical guide rail to give the required armrest position.

Once seated and satisfied that the footrests are correctly adjusted, check to see that the

controller is in a convenient position so that you can reach it easily and safely. To adjust

the controller forward or rearward, loosen star knob and retighten after adjustment.

If your smart wheelchair begins to move in an unexpected manner, immediately

release the joystick. Unless the joystick is damaged, this action should stop your

smart wheelchair.

www.ayecogroup.com

DO YOU KNOW?

Unlike manual wheelchairs, GoBee

do not require upper arm strength

to move forward.