Architectural Control Systems 1570 설치 지침 매뉴얼 - 페이지 6

{카테고리_이름} Architectural Control Systems 1570에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Architectural Control Systems 1570 6 페이지. Electric trim control, corbin 955 and yale 626f heavy duty trim

페이지 인쇄

CABLE ASSEMBLY WIRING



REMOVE END COVER AND BOTTOM COVER FROM DEVICE SEE FIGURE 3.



PLACE WIRE HARNESS ON THE CARRIER WITH THE CONNECTOR AT THE HEAD OF

THE DEVICE. ALLOW 6" FOR CONNECTION TO TRIM CONTROL CONNECTOR, WHICH

HAS BEEN PULLED THROUGH ACESS HOLE IN DOOR.



SECURE CABLE IN 2 PLACES WITH SELF ADHESIVE MOUNTS AND TY-WRAPS

INCLUDED WITH CABLE ASSEMBLY. LOCATE TY-WRAPS SO THAT CABLE DOES NOT

INTERFERE WITH TRIM SLIDE OR OTHER MOVING MECHANICAL PARTS.



REPLACE END COVER AND BOTTOM COVER.



MOUNT DEVICE SO THAT TRIM TAILPIECE IS INSERTED INTO DEVICE CAM SLOT IN

HORIZONTAL POSITION AS SHOWN ABOVE IN FIGURE 1.



CONNECT CABLE CONNECTOR TO TRIM CONNECTOR AND CONTINUE MOUNTING

DEVICE ACCORDING TO MANUFACTURERS INSTRUCTIONS.

FIGURE 3

POWER TRANSFER HOOKUP DIAGRAM

¾" DIA.

WIRE

ACCESS

HOLE

4" MAXIMUM

LOCATE AND PREPARE WIRE ACCESS HOLE TO

POWER TRANSFER DEVICE AS SHOWN.

2720 CLARK AVE.

ST. LOUIS, MO 63103

(800) 753-5558

Rev. 11/2017

II-E1500-08