CREE LIGHTING Stylus ST3-WD 설치 지침 매뉴얼
{카테고리_이름} CREE LIGHTING Stylus ST3-WD에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CREE LIGHTING Stylus ST3-WD 7 페이지. Led ambient luminaire, wall mount
페이지 인쇄IMPORTANT SAFEGUARDS
When using electrical equipment, basic safety precautions should always be
followed including the following:
READ AND FOLLOW ALL
SAFETY INSTRUCTIONS
1.
DANGER- Risk of shock- Disconnect power before installation.
DANGER – Risque de choc – Couper l'alimentation avant
l'installation.
2.
This luminaire must be installed in accordance with the NEC or
your local electrical code. If you are not familiar with these codes
and requirements, consult a qualified electrician.
Ce produit doit être installé conformément à NEC ou votre code
électrique local. Si vous n'êtes pas familier avec ces codes et ces
exigences, veuillez contacter un électricien qualifié.
3.
SUITABLE FOR CONTINUOUS ROW MOUNTING.
PEUT ÊTRE MONTÉ EN RANGÉE CONTINUE.
4.
Make sure the equipment is properly grounded.
5.
Always de-energize the circuit and/or equipment before connecting
to, disconnecting from or servicing the equipment
SAVE THESE INSTRUCTIONS
FOR FUTURE REFERENCE
NOTES:
• CAUTION - It is the installers responsibility to ensure that the wall is structurally capable of supporting the weight of luminaire/luminaire row.
• Endcap kits and joining hardware are packaged separately for continuous rows.
• To Prevent Luminaire Row From Over-Current: By adding the input current of each luminaire section marked on the luminaire, the total current per
power feed must not exceed the maximum line wire amperage rating in the luminaire and the power feed cord/wire amperage rating whichever is
least.
1 of 7
1
3
2 "
5
3
8 "
ST3-WD
Installation Instructions are divided into
3 sections:
1. Wall Mounting - Individual Luminaire, ST3-WD
and ST3-WI
2. Wall Mounting - Continuous Row, ST3-WD and
ST3-WI
3. Electrical Connections
1
4
2 "
5
3
8 "
ST3-WI
Stylus Series
LED Ambient Luminaire
Wall Mount
INSTALLATION INSTRUCTIONS
INSTRUCTIONS D'INSTALLATION
LPN00644X0008A0_A