CREE LIGHTING Cadiant Experience Dynamic Skylight 설치 지침 - 페이지 2

{카테고리_이름} CREE LIGHTING Cadiant Experience Dynamic Skylight에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. CREE LIGHTING Cadiant Experience Dynamic Skylight 3 페이지.

페이지 인쇄

(4) Tabs For Safety

Wire Hangers

Do not screw any

additional screws into

the side or top of the

luminaire.

WEST

T-BAR CEILING INSTALLATION

NOTE: For secondary bracing

(recommended), locate tabs on the side of

the luminaire for safety wire hangers. See

Figure 2.

NOTE: DO NOT LAY THE CADI ANT™

DYNAMIC SKYLIGHT DOWN ON THE

SENSOR.

STEP 1:

Unpack the

Cadiant™ Dynamic Skylight

from its shipping container being careful of

the sensor and not pinching the sidewalls.

STEP 2:

Bring the Cadiant™ Dynamic Skylight into

the T-Bar Ceiling panel and attach the

retention clips on the housing onto the T-Bar.

See

Figure 2.

To maintain the

NOTE:

Cadiant™ Dynamic

Skylight experience,

ensure that the

sensor on luminaire is oriented as close

as possible to north. See Figure 2 and

3. For multiple luminaire installation, all

luminaires need to be facing the same

2 of 3

Wiring Access Panel

(4) T-Bar Retention

Clips

EAST`

Sensor

NORTH

direction, with the sensor oriented as close

as possible to north.

NOTE: Ensure luminaries are securely

fastened to ceiling framing member by

mechanical means identified for use with

the luminaire and ceiling member type in

accordance with the NEC revision currently in

place with the Authority Having Jurisdiction

(AHJ) over the locale of the installation.

STEP 3:

Remove the wiring access panel by

removing the one Phillips head screw. See

Figure 2.

STEP 4:

Locate the RFM Module in the module

compartment and plug the module into

the RFM port located in the module

compartment. See Figure 2.

STEP 5:

Connect input conduit to access plate and

make wiring connections per the

section.

Connection

RFM Module

Sensor NEEDS TO BE

ORIENTED NORTH

STEP 6:

Push all wires back into the luminaire.

Re-secure cover with the provided Phillips

head screw.

DRYWALL GRID ADAPTER

INSTALLATION NOTES

NOTE: The Cadiant™ Dynamic Skylight

is also suitable for installation in drywall

applications ONLY when mounted in the Cree

Lighting Drywall Grid Adapter Kit model

DGA22.

STEP 1:

Installation of the luminaire should follow the

instructions provided in the DGA kit with the

following exceptions:

• Drywall installation employing the DGA

• Ensure the luminaire is independently

Electrical

Module Compartment

(4) Tabs For Safety

Wire Hangers

kit is for single luminaire installations

ONLY.

secured to ceiling framing members by

mechanical means using the provided

tabs for Safety Wire Hangers. See

Figure 2.

LPN00647X0001A0_D