3Com OfficeConnect 3C1670500C 사용자 설명서 - 페이지 6

{카테고리_이름} 3Com OfficeConnect 3C1670500C에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 3Com OfficeConnect 3C1670500C 19 페이지. 3com officeconnect 3c1670500c: specifications
3Com OfficeConnect 3C1670500C에 대해서도 마찬가지입니다: 사양 (2 페이지)

페이지 인쇄

Wall Mounting

There are two slots on the underside of the Switch that can

be used for wall mounting. The Switch must be mounted

with the LEDs facing upwards.

When wall mounting the unit, ensure it is within reach

of the power outlet

When wall mounting the unit, ensure that the rubber

feet are not fixed

Mounting Instructions for Cement Walls

1 Make two holes 67mm apart for 5 port, and 100mm apart

for 8 port and insert two nylon or similar screw anchors

that are suitable for the wall construction.

2 Fix two suitable screws into the anchors, leaving their

heads 3 mm (0.12 in.) clear of the wall surface. The screws

should be at least 30 mm (1.2 in.) long,

3 Remove any connections in the Switch and locate it over

the screw heads. When in line, gently push the Switch on

to the wall and move it downwards to secure.

Mounting Instructions for Wood Walls

1 Make two holes 67mm apart for 5 port, and 100mm apart

for 8 port.

2 Fix two suitable screws directly into the wall, leaving their

heads 3 mm (0.12 in.) clear of the wall surface. The screws

should be at least 20 mm (0.75 in.) long,

3 Remove any connections in the Switch and locate it over

the screw heads. When in line, gently push the Switch on

to the wall and move it downwards to secure.

CAUTION: When making connections, be careful not

to push the Switch up and off the wall.