Creek Company ODC 1220 조립 지침 매뉴얼 - 페이지 5

{카테고리_이름} Creek Company ODC 1220에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Creek Company ODC 1220 6 페이지.

Figure 3

Assembled ODC 1220

A . Stripping Apron

B. Under the Seat, Zippered Mesh Bag

C. Behind the Seat, Zippered Mesh Bag

D. Side Storage Pocket

E. Side Storage Pocket

F Valve Cover

G. Oar Stop

H. Anchor Line Storage Bag

VI. ATTACH STRIPPING APRON TO FRAME

1. Position Stripping Apron at top of Leaning Bar (see figure 3).

2. Wrap hook & loop strap around Leaning Bar and snugly strap down.

3. Waist Belt for Stripping Apron is provided so fisherman can wear stripping apron if desired.

VII. ATTACH SIDE STORAGE POCKETS TO FRAME

1. Position Side Storage Pockets along Left Frame Member and Right Frame Member of Rear Rowing Frame (see figure 3).

2. Wrap lower hook & loop straps around bottom rail of frame and strap down.

3. Wrap hook & loop straps around upper rail frame and strap down.

VIII. ATTACH UNDER THE SEAT ZIPPERED MESH STORAGE

BAG & BEHIND THE SEAT ZIPPERED MESH STORAGE BAG.

1. Position Zippered Mesh Storage Bags on frame. Smaller bag under Tall Seat Support Frame Member, with zipper facing forward.

Larger bag behind Tall Seat Support Frame Member. (see figure 3)

2. Attach bags to frame using ladder lock buckles and straps to wrap around frame.

VIIII. ROD HOLDER TO FRAME

1. Rod Holder attaches to frame anywhere a Snap Pin assembly is found.

2. Recommended location is where Cargo Deck attaches to Left or Right Frame Member (see figure 2).

ODC 1220

Frame

Nylon Strap

Cam Lock

Buckle

D-Ring

Figure 3a Valve Insert detail

Pontoon

Transom for

trolling motor

Top valve cap

Valve assembly

Valve plate

Bladder