Creek Company ODC 420 Outdoor Discovery Craft 매뉴얼 - 페이지 2

{카테고리_이름} Creek Company ODC 420 Outdoor Discovery Craft에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Creek Company ODC 420 Outdoor Discovery Craft 2 페이지.

페이지 인쇄

Note: We use Boston Valves as the Valve Assembly for the ODC 420

size for a Boston Valve is needed to inflate your ODC 420

the store where you bought your ODC 420

Valve Assembly into the Air Bladder, screwing tightly by hand. When fully seating Valve Assembly, be sure that the

Valve Plate is in place around the Valve Assembly and not restricting the Valve Assembly from full seal. After inflating,

be sure to fully seat the Top Cap on to each Valve Assembly, screwing tightly by hand. Both are required for an airtight

seal. (see illustration 3 for Valve Assembly explanation)

1. Inflate both of the Air Bladders, one at a time, until firm. Valves for Air Bladders are located inside

main pockets. (One on each side, see illustration 1).

2. Again, be sure Top Valve Cap and Valve Assembly are fully seated.

3. Do not over-inflate

Deflation: Unscrew entire Valve Assembly from Air Bladder to deflate the Air Bladders of your ODC 420

D-Rings

Pocket

(Valves for

Bladders

located in

Pockets)

Features found on your Creek Company ODC 420™

(see Illustrations)

1. Carry Handles (top & bottom)

2. D-rings to attach Pack Straps (Pack Straps not included).

3. D-Rings to attach gear (two on nose of Pontoons and two on outside of Pockets).

4. Pockets with five separate storage areas plus mesh for additional storage.

5. Foam Fly Patch for drying and storage of flies.

6. Stripping Apron for collecting your fly line.

7. Adjustable Seat Back for comfort

8. Handy Ruler on Stripping Apron to measure fish.

9. Grommets for water drainage

10. Heavy Duty 30 oz. PVC material on bottoms for extra durability.

Inflating Your Creek Company ODC 420

™

, or the Creek Company directly. Before inflation, be sure to fully seat each

ILLUSTRATION 1

TOP VIEW

Stripping

Apron

Seat Bottom

Seat Back

Pocket

Grommets

Accessories are available for your ODC 420

or visit the Creek Company Store at www.CreekCompany.com

The Creek Company, PO Box 773892, Steamboat Springs, CO 80477

970-879-5221 • fax 970-879-7577 • email: [email protected] • Made in China

Specifications and other details subject to change without notice. All Creek Company products are

guaranteed against defects in material and workmanship for the life of the product to the original owner.

This does not cover damage due to misuse or normal wear and tear.

™

. A Hand or Foot Pump with the proper adapter

™

. If you need to purchase the proper Pump please contact

Foam Fly

Patch

Carry Handle

™

. Ask for them where you bought your ODC 420

™

™.

ILLUSTRATION 2

BOTTOM VIEW

Stripping

Apron

Grommets

ILLUSTRATION 3

Top Valve Cap

Bladder

Valve Insert Detai

D-Rings

to attach

Pack

Straps

(Pack Straps

not included)

Valve

Assembly

Valve

Plate

™