Digigram LX-MADI 사용자 설명서 - 페이지 12

{카테고리_이름} Digigram LX-MADI에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Digigram LX-MADI 20 페이지. Multichannel madi pci express sound card
Digigram LX-MADI에 대해서도 마찬가지입니다: 사용자 설명서 (20 페이지)

페이지 인쇄

LX-MADI

User Manual

v 1.0 October 2015

Buffer size

The buffer size determines the size in samples per buffer used by the Asio driver to transfer audio data from/to the

board's Input/Output. The lower the buffer size, the lower the latency.

The range of the buffer size settings depends on the stream granularity defined in the Digigram Control Center.

You can access this parameter by clicking on the " C hange DSP granularity " button.

Note that, audio dropouts may be experienced when using very small buffer size.

It is possible to check if audio dropouts are experienced. First of all start the ASIO based. Allocate the ASIO channels

in this application. Open this ASIO control panel, and click on the " T est " button.

Click on "Launch test" to start the test. Errors are listed in the window. Stop the test by clicking on " S top test " .

In case errors are reported, buffer size has to be increased.

Select Activated IO

Clicking on this button allows selecting the channels that are managed by the ASIO driver. By default, all the

channels are enabled.