Digigram LX6464ES 사용자 설명서 - 페이지 7

{카테고리_이름} Digigram LX6464ES에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Digigram LX6464ES 14 페이지. Ethersound pci sound card

Digigram LX6464ES 사용자 설명서

HARDWARE REQUIREMENTS

Minimum requirements

PC with one free PCI or PCI-X slot (5 V or 3.3 V)
CPU power and memory required depend on the operating system and on the
audio application used.

Software requirements

The LX6464ES requires installation of the drivers included in LX6464ES Kit
version 1.00 or higher. This kit includes:
a WDM DirectSound driver
an ASIO driver

Supported operating systems

LX6464ES cards run under Windows Server 2003
Windows Vista

HARDWARE INSTALLATION

The card has to be installed in the computer prior to installing its driver.

Installing the card

Gently plug the card in a free PCI slot and press it down to position it firmly.
Tighten the screw.

Interrupt and memory address

Hardware interrupt and addresses are automatically set up at start-up by the
PCI PnP BIOS.

SOFTWARE INSTALLATION

Note:
the installation of the software requires administrator rights on your
computer
Please visit the Digigram web site at www.digigram.com for the most recent
driver.
In case you run a specific application developed or installed by a Digigram
Partner, this application might require the use of a specific driver version. In
this case, make sure that the updated driver has been approved by your
supplier.
version 32 bits
.
LX6464ES
User's Manual
, Windows XP
, and
7