Archon RTB16 설치, 작동 및 유지보수 지침 - 페이지 2

{카테고리_이름} Archon RTB16에 대한 설치, 작동 및 유지보수 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Archon RTB16 4 페이지.

페이지 인쇄

PRODUCT WARRANTY

ARCHON Industries Inc., warrants its products, as

designed and manufactured by ARCHON, to be free of

defects in material and workmanship for a period of one

year after the date of installation or eighteen months

after the date of manufacture, whichever is earliest.

ARCHON will, at its option, replace or repair any

products that fail during the warranty period due to

defective material or workmanship.

Prior to submitting any claim for warranty service, the

owner must submit proof of purchase to ARCHON and

obtain written authorization to return the product.

Thereafter, the product shall be returned to ARCHON in

Suffern, New York, with freight prepaid.

This warranty shall not apply if the product has been

disassembled, tampered with, repaired or altered outside

of the ARCHON factory, or if it has been subjected to

misuse, neglect or abuse.

ARCHON's responsibility hereunder is limited to

repairing or replacing the product at its expense.

ARCHON shall not be liable for loss, damage, or

expenses directly or indirectly related to the installation

or use of its products, or from any other cause or for

consequential damages. It is expressly understood that

ARCHON is not responsible for damage or injury caused

to other products, building, property or persons by

reason of the installation or use of its products.

THIS IS ARCHON'S SOLE WARRANTY AND IN LIEU

OF ALL OTHER WARRANTIES, EXPRESSED OR

IMPLIED WHICH ARE HEREBY EXCLUDED,

INCLUDING ALL WARRANTIES OF

MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE.

This document and the warranty contained herein may

not be modified and no other warranty, expressed or

implied, shall be made by or on behalf of ARCHON

unless modified or made in writing and signed by the

President or a Vice President of ARCHON.

WARNINGS AND SAFETY

PRECAUTIONS

IMPORTANT: READ ALL INSTRUCTIONS BEFORE USING

SPRAY GUN



For water use only.



Before spraying, gun must be pointed in direction of

arrow shown on side of gun.



If spray gun assembly is equipped with trigger lock

ring, the ring must be released before spraying

operation is finished.



Proper clothing and eye protection should always be

worn by operator and people in spray areas.



DO NOT use with steam service.



DO NOT point spray gun at any person or any part

of body. High temperature liquids under spraying

pressures can cause serious burns or injury.



DO NOT exceed 200˚F (93˚C) temperature.



DO NOT exceed 150 psi.



DO NOT drop gun on trigger as this may actuate hot

spray onto personnel.

INTRODUCTION

The model RTB16 spray gun is a heavy-duty, impact

resistant spray gun with a stainless steel or bronze body

and a replaceable synthetic body cover. The Model

RTB16 spray gun provides a variable liquid spray from a

50 degree hollow cone to a stream spray pattern by

trigger control. The light trigger pull provides sensitive

spray pattern control. The heat resistant rubber body

cover remains comfortable at high liquid temperatures.

The Model RTB16 spray gun connection is 1/2" NPT,

and will accommodate inlet swivel connectors with 3/4"

garden hose thread (F), 5/8" or 3/4" hose shank inlet

connections. These connectors also have lock rings for

locking the Spray Gun trigger in a spraying position.

SYSTEM DESCRIPTION

Features of the Model RTB16 Spray Guns:



Maximum pressure and temperature: 150 psi at

200˚F (10.3 bar at 93˚C)



Single piece stainless steel or bronze body



Stainless Steel valve stem



Viton valve seat and Buna O-ring seals



Comfortable hand grip



Easy operation - designed to reduce fatigue



Replaceable rubber body cover provides

temperature insulation and protects spray gun from

extensive wear



Easy repair - all components are user serviceable

INSTALLATION

1. Ensure water supply valve is off. Attach RTB16

spray gun to a hose that has a pressure and

temperature rating meeting that of your anticipated

maximum supply pressure and temperature.

2. Examine all connections, making sure they are of

proper type and are secure and leak-proof.

3. Holding the RTB16 spray gun in a downward vertical

position with arrows pointed away from the body,

turn on the water supply valve.

4. After checking that all safety precautions have been

taken, begin spraying by slowly squeezing the

trigger.