Archos 101 helium series 자주 묻는 질문 - 페이지 11
{카테고리_이름} Archos 101 helium series에 대한 자주 묻는 질문을 온라인으로 검색하거나 PDF를 다운로드하세요. Archos 101 helium series 14 페이지. How to reinitialize
Archos 101 helium series에 대해서도 마찬가지입니다: 기술 사양 (7 페이지), 브로셔 및 사양 (6 페이지), 매뉴얼 (2 페이지)
페이지 인쇄
Archives
mode, make sure that the device has
been charging for at least 4 hours
beforehand.
During this you will need the USB cable
for your device as well as the charging
cable. You will also need a PC or Mac
and the latest firmware for your device
downloaded from Archos.com to your
PC or Mac.
Getting into Recovery mode on the
28IT, 32IT, 35IT:
Press and hold the power button, when
the Archos logo is displayed, press the
power button 3 times quickly. The white
ARCHOS Recovery screen is displayed.
Use Vol + and - to switch between
options
and
the
power
button
to
validate your selection for the following
steps.
Getting into Recovery mode on the
43IT, 70IT, 101IT:
Hold down Vol - and press the power
button. Keep pressing the Vol – button
until
the
white
ARCHOS
Recovery
screen is displayed. Use Vol + and - to
switch between options and the power
button to validate your selection for the
following steps.
1. Choose 'Format System' from the list
2. Choose 'Reformat Device' from the
second list, then 'I Understand' (after
having read the warning and making
sure that you have downloaded the
firmware
for
your
device
from
Archos.com on your PC), you will be
asked to plug in the charger of your
device
3. Your device will format itself and
when finished will ask for a 'USB
connection' – plug in the device to your
computer via the USB cable
4. Your PC will detect the device like a
portable hard drive, open it using your
computer's file browser and copy the
Page 11 / 14
(c) 2019 ARCHOS <[email protected]> | 2019-07-27 04:49
URL: http://faq.archos.com//index.php?action=artikel&cat=138&id=90&artlang=en