Digigram Aqonda 8 사용자 설명서 - 페이지 15
{카테고리_이름} Digigram Aqonda 8에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Digigram Aqonda 8 20 페이지. Ethersound audio bridges
APPENDIX A: GPIO CONNECTORS
AQONDA 8 and AQONDA 16 feature eight ground sensing GPIs and eight relay GPOs. A virtual link between
GPIs and GPOs of various devices on the same EtherSound network can be realized by means of the EScontrol
application. The GPIO pins are labeled 1 through 8 on the rear panel as illustrated.
GND
GND
GND
1
2
3
1
2
3
General Purpose Inputs (GPIs)
14
GND
GND
GND
5
6
4
4
5
6
GND
GND
7
8
7
8
The GPI status can be either "1" or "0".
Switching the GPI state to "0":
It is read "0" as soon as the pin labeled "K" on the scheme is
connected to ground, e.g. to a pin labeled "GND".
Switching the GPI state to "1":
Leave pin K floating
The GPIs do not need external power supply.
GPI
GPO