3Com OfficeConnect 3C16791C 사용자 설명서 - 페이지 9

{카테고리_이름} 3Com OfficeConnect 3C16791C에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 3Com OfficeConnect 3C16791C 19 페이지. Fast ethernet switch officeconnect series
3Com OfficeConnect 3C16791C에 대해서도 마찬가지입니다: 사양 (2 페이지), 데이터시트 (2 페이지)

페이지 인쇄

3C number

3C12VUS or 3C5VHEUS

3C12VUK or 3C5VHEUK

3C12VME or 3C5VHEME

3C12VAA or 3C5VHEAA

3C12VSA

3C12VKR

3C12VRA

Only use the power adapter supplied with the Switch

or a replacement OfficeConnect power adapter. Do

not use any other power adapter.

Port Status LED not lit for a port that has a TP cable

connected. After connection, it may take several seconds for

the Port Status LEDs to illuminate. The Port Status LED should

turn, Green for each port that is connected. Please refer to

'About Your Switch' for a full description of the LEDs.

If the Port Status LED is not lit after several seconds, ensure

that the connected device is powered on, that the TP cable is

not damaged and that it is correctly inserted at both ends.

You may find that a TP cable works when connected to the

Switch, but that it does not if disconnected from the Switch

and connected to another device. This may be because the

other device does not have the automatic MDI/MDIX feature.

The Port Status LED is lit but the network performance of

the switch is poor. The switch supports full-duplex autonego-

tiation. If the connected device does not support autonegotia-

tion, ensure it is configured for half duplex operation only.

Region

United States

United Kingdom

Mainland Europe

Australasia

South Africa

South Korea

Argentina

Support

and Safety

Information